Cookie Consent by Free Privacy Policy Generator Opens in a new tab
Benefits of Topographical Surveys
Measured Building Surveys

What Is a Land Registry Compliant Plan and When Do You Need One?

Graham KingWritten byGraham KingDirector, Terrain Surveys
Published
Reading time8 min read

Your solicitor has asked for “a Land Registry compliant plan”. It sounds like a box-ticking exercise: a drawing with a red line and a north arrow.

It’s more than that.

A Land Registry compliant plan is a scaled drawing that lets HM Land Registry (HMLR) identify your land on the Ordnance Survey (OS) map. You’ll need one for deals like selling part of a garden, granting a lease of a flat or registering land for the first time.

What “compliant” doesn’t promise is that the line sits in the right place. That gap is what this guide is really about.

What a Land Registry compliant plan actually is

HMLR sets the test in its Practice Guide 40 guidance on preparing plans. Any plan lodged must be “such that the land concerned can be identified clearly on the Ordnance Survey map”.

That’s the test. Identification.

You’ll usually come across one of three plans:

  • Title plan: HMLR’s own plan of an existing registered title.
  • Transfer plan: attached to a transfer of part (form TP1 or TP2).
  • Lease plan: attached to a lease, showing exactly what’s let, such as a flat.

Notice what the test doesn’t ask. HMLR can accept a plan because it can find the land, even if the line sits a metre or more from the real boundary. Accepted isn’t the same as accurate.

That’s why my rule never changes: you always need to go to site to survey the property, otherwise you can’t produce an accurate Land Registry compliant plan.

When do you need one?

You need a new plan whenever a deal creates or defines a line that isn’t already on the register. That usually means one of three situations:

  • Selling or transferring part of your land. This could be a building plot, part of your garden, or a freehold split into plots. Your title plan shows the whole, so the new parcel needs its own plan.
  • Granting a new lease of more than seven years. That’s more than seven, not seven or longer. Flats are the classic case, especially in a converted house. An extension or lease variation can also expose an old lease plan that no longer matches the building and needs replacing.
  • First registration. According to Farmers Guide, roughly 10% of land in England and Wales is still unregistered. A sale isn’t the only thing that brings land onto the register: a gift, an inheritance or a first mortgage can too. Most first registrations need a plan.

When you don’t need a new plan

What if nothing new is being defined? No new line, no new plan. You won’t usually need one for:

  • a transfer of the whole of a registered title, because the title plan already defines it
  • a transfer or lease of the whole of an area already numbered or coloured on the seller’s title plan
  • first registration of a house with a clear postal address and well-defined boundaries, where a description in words can do (but not where there are open side passages, open-plan frontages, undefined rear gardens or separate garages)

Not needing a new plan, though, doesn’t mean the existing title plan shows your exact boundary.

Compliant isn’t accurate: what your title plan really shows

Most registered titles show general boundaries only, under section 60 of the Land Registration Act 2002. The red edging shows roughly where a boundary runs, not exactly where.

HMLR’s boundaries guidance says red edging “is not a precise measurement”. There’s also no standard tolerance linking a general boundary to the legal one.

Part of the reason is what title plans are drawn on: OS mapping, which has tolerances of its own. HMLR’s own figures put the average positional error of OS mapping at under ±0.5m at 1:1250, the scale used in towns. At 1:2500, the scale used in the countryside, it’s under ±2.8m.

Clients often ask us to peg out “the Land Registry line” on the ground. It can’t be done directly. Title plans carry no coordinates, and the broad red edging, transferred to the ground, is a couple of metres thick. All anyone can do is match it as closely as possible to what physically exists on site.

In 95% of our surveys, we find discrepancies between OS data and what’s really there. They’re typically 0.1m to 5m, and we’ve recorded 10m on some rural boundaries. The features OS maps most often get wrong? Boundary and building lines.

Exactly what a transfer or lease plan exists to define.

Why an accurate plan starts with a site visit

So what happens when someone draws a new plan from that mapping at a desk?

It copies the error. A desktop plan can only reproduce the OS line, tolerance and all. Once it’s attached to a transfer or lease, that error is locked into the deed.

It also can’t show what the map doesn’t:

  • a boundary that doesn’t exist yet, such as a split garden, a new plot or an open frontage
  • the internal floor layouts every flat lease needs
  • extensions built since OS last surveyed the area

Some providers sell OS-based plans online with nobody visiting the property. HMLR’s test is identification, so a plan like that may well be accepted. Accepted, but not accurate.

On site, the picture changes. Our surveys are verified to ±15mm against independent control points. A measured survey is often 10 to 20 times more accurate than the mapping behind a title plan.

That precision is what makes it possible to dimension a new boundary in metres to two decimal places. That’s how HMLR’s guidance asks you to show a boundary that isn’t yet marked on the ground.

Can I use the plans I already have?

The most common confusion I deal with is clients assuming their deeds, OS-based plans and MasterMap data (OS’s detailed digital map) are accurate enough.

Around half of our boundary clients arrive with their deeds, but deed plans are indicative only. Other plans fare no better:

  • Estate agent floor plans: indicative only.
  • Architect’s drawings: HMLR’s guidance says they “often look impressive” but rarely conform to its requirements.
  • Hand-drawn sketches: HMLR says they must not be used.
  • Measurements scaled off your title plan: they inherit every tolerance above.

None of these was drawn to define a new boundary, so none replaces measuring the site.

What the plan must show

Once the line has been measured, the drawing has to present it the way HMLR’s guidance expects:

  • a stated metric scale, plus a bar scale
  • a north point
  • enough surrounding detail, such as roads, junctions and neighbouring buildings, to locate the land on the OS map
  • the extent clearly edged, coloured or hatched, fully enclosed and not obscuring detail
  • the whole property, including any garage, parking space, bin store and garden
  • a match with the deed’s wording, including every colour the deed refers to

Preferred scales are 1:1250 to 1:500 for urban land and 1:2500 for rural land.

These are strong guidelines rather than rules. A well-drawn plan without a scale or north point can still be accepted if it relates precisely to the OS map. But there’s no reason to invite a query.

Extra requirements for lease plans

A flat lease plan has to show something external mapping can’t: the inside of the building. On top of the list above, it needs:

  • the flat’s relationship to the building footprint
  • each floor level identified, with the extent at each level (on separate plans if needed)
  • intricate internal divisions at a larger scale, such as 1:200
  • separate parts marked, such as a garage, parking space or bin store
  • communal areas and access routes clearly distinguished from the demise (the part actually let)

Parking needs particular care. The plan must make clear whether the tenant gets a specific, exclusive space or just a right to park in a shared area.

That’s why an accurate flat lease plan always starts with an internal measured survey.

Why plans get rejected or requisitioned

A requisition is HMLR pausing your application until something is put right. According to HMLR data reported by Today’s Conveyancer, fully avoidable requisitions made up 4.6% of 1.3 million applications between April and September 2025.

Many plan faults come down to presentation and paperwork rather than measurement. Check for these before anything is lodged:

  • Missing or unsigned plan. The deed refers to a plan that isn’t attached, or the plan isn’t signed. Plans for a transfer or lease of part must be signed by the seller or landlord (rule 213 of the Land Registration Rules 2003), though a conveyancer can sign for them.
  • The wrong scale. This includes a reduced copy that still shows its original scale. It also includes a PDF printed “fit to page”, which HMLR increasingly receives. We supply a PDF alongside the editable DWG drawing file: print it at 100%.
  • “For identification only”. Ideally a plan shouldn’t carry this wording. It may be rejected unless it can be accurately related to the OS map.
  • Unclear extent. Thick or ambiguous edging, or an extent that isn’t fully defined.

Who does what, and in what order

Who can draw a compliant plan? HMLR prescribes no qualification, and almost any accurately scaled plan that follows its guidance should be satisfactory. So the plan’s accuracy depends entirely on who you choose to measure it.

Our job is the measurement. We produce accurate measured surveys, and our plans and surveys meet the standard of accuracy your application requires.

The work of subdivision is down to you as our client, or the parties involved, usually through their solicitors. That means deciding how to split the property up and submitting those plans and applications.

In practice, the order runs like this:

  • Agree with the buyer, tenant or neighbour where the line or demise goes.
  • Have the property measured on site.
  • Your solicitor drafts the transfer or lease to match the plan.
  • The seller or landlord signs the plan.
  • The application is lodged with HMLR.

Have your title number, the address, the areas and rights to include, and your solicitor’s instructions ready. Then order early, well before exchange, so the plan never holds up the deal.

When choosing a surveyor, look for membership of The Survey Association (TSA), which we hold. Regulation by the Royal Institution of Chartered Surveyors (RICS) is another mark to look for.

What it costs

Each price below buys something different:

  • Desktop plans are advertised from around £115. That buys a drawing from existing mapping with no site visit, so no improvement on the OS line.
  • A measured survey of a small residential property (topographical or boundary) costs £800 to £1,200 with us, with the drawing delivered in 3 to 5 days.
  • Lease plans for flats need an internal measured survey, so we quote each building individually.
  • An official copy of your existing title plan costs £7 from GOV.UK and shows you what’s registered now.

HMLR’s registration fees come on top of all of these. For example, registering a transfer of part or a lease valued at £200,001 to £500,000 costs £330. Transfers of the whole get a discount for applying through the portal, but leases and transfers of part don’t. HMLR’s registration fees page has the full scale.

The fee is the same whether the plan is accurate or not. What changes is whether the boundary you’re paying to register is where it really is.

Need an Accurate Survey for Your Land Registry Plan?

We’ll measure your property on site to the standard of accuracy your Land Registry application needs. Get a free, no-obligation quote.

+44(0)143 884 1300

Request a Quote

WordsCharactersReading time

Get in touch

Max 50MB, jpg, jpeg, png, avif, gif, webp, dwg, dxf, docx and pdf files only.

Processing...
Thank you! Your subscription has been confirmed. You'll hear from us soon.
ErrorHere